 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 5.0V HCMOS SMD OSCILLATOR MODEL: F3345 SERIES FEATURES * * * * 5.0V Operation HCMOS/TTL Output Tri-State Enable/Disable Tape and Reel (2,000 pcs. STD) OPTIONS * 1.05mm Height Max * Standby Function (F4101) Learn more about: Part Marking Identification Tape and Reel Specification Mechanical Specification Internet required * PART NUMBER SELECTION Learn More - Internet Required Part Number 092-Frequency-xxxxx 093-Frequency-xxxxx 090-Frequency-xxxxx 091-Frequency-xxxxx 094-Frequency-xxxxx 095-Frequency-xxxxx 096-Frequency-xxxxx Operating Model Frequency Number Stability1 Temperature (C) F3345 100PPM -10 ~ +70 -40 ~ +85 F3345R 100PPM -10 ~ +70 F3340 50PPM -40 ~ +85 F3340R 50PPM F3346 25PPM -10 ~ +70 -40 ~ +85 F3346R 25PPM* -10 ~ +70 F3348 20PPM* Frequency Range (MHz) 1.000 ~ 80.000 1.000 ~ 80.000 1.000 ~ 80.000 1.000 ~ 80.000 1.000 ~ 80.000 1.000 ~ 80.000 1.000 ~ 80.000 * ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Storage Temperature Range (TSTG) Supply Voltage (VDD) Input Current (IDD) 1.000 ~ 25.000 MHz 25.000+ ~ 50.000 MHz 50.000+ ~ 67.000 MHz 67.000+ ~ 80.000 MHz Output Symmetry (50% VDD) Rise Time (10% ~ 90% VDD) (TR) Fall Time (90% ~ 10% VDD) (TF) Output Voltage (VOL) (VOH) Output Current (IOL) (IOH) Output Load TTL HCMOS Start-up Time (TS) Enable/Disable Time 2 Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish 1 MAX (unless otherwise noted) 1.000 ~ 80.000 MHz -55C ~ +125C 5.0V 10% 25mA 40mA 60mA 73mA 45% ~ 55% 7nS 7nS 10% VDD 90% VDD Min 16mA Min -16mA Min 10TTL 50pF 10mS 100nS 260C / 10 Seconds 1 Au Inclusive of 25C tolerance, operating temperature range, input voltage change, load change, aging, shock, and vibration. *Excludes Shock/Vibration 2 An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. Note: A 0.01F bypass capacitor should be placed between VDD (Pin 4) and GND (Pin 2) to minimize power supply line noise. All specifications subject to change without notice. Rev. 8/2/05 All dimensions are in millimeters. * ENABLE / DISABLE FUNCTION INH (Pin 1) OUTPUT (Pin 3) OPEN 2 ACTIVE '1' Level VIH 2.2 V ACTIVE '0' Level VIL 0.8 V High Z 66 FOXElectronics | 5570 Enterprise Parkway | Fort Myers, Florida 33905 | USA +1(239) 693.0099 | FAX +1 (239) 693.1554 Visit http://www.foxonline.com or Email us at http://www.foxonline.com/email.htm (c) 2005 Fox Electronics All rights reserved. |
Price & Availability of F3345
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |